Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

A holistic approach to SIM platform and its application to early-warning satellite system

This study proposes a new simulation platform named Simulation Integrated Management (SIM) for the analysis of parallel and distributed systems. The platform eases the process of designing and testing both applications and architectures. The main characteristics of SIM are flexibility, scalability, and expandability. To improve the efficiency of project development, new models of early-warning satellite system were designed based on the SIM platform. Finally, through a series of experiments, the correctness of SIM platform and the aforementioned early-warning satellite models was validated, and the systematical analyses for the orbital determination precision of the ballistic missile during its entire flight process were presented, as well as the deviation of the launch/landing point. Furthermore, the causes of deviation and prevention methods will be fully explained. The simulation platform and the models will lay the foundations for further validations of autonomy technology in space attack-defense architecture research.     

基于深度学习的空间站舱内服务机器人视觉跟踪

为提升舱内跟随服务机器人的任务辅助能力,解决机器人对航天员的视觉跟踪问题,提出了一种基于深度学习和概率模型的人体视觉跟踪算法。利用深度卷积神经网络实现了对穿着多样、姿态任意人体的稳定检测。结合人体检测结果,设计了运动预测概率模型,实现了对指定人员准确、连续的跟踪。算法对包含大多数航天员活动的多个数据集进行了验证。实验结果表明:提出的跟踪算法实现了对穿着多样、姿态任意人体的稳定跟踪,并有效避免了由于穿着相似、遮挡可能造成的误跟踪问题。该算法为空间站舱内跟随服务机器人对航天员的视觉跟踪提供了有效的解决方法。算法基于融合的RGB-D图像,工程上易于构建和实现,也可拓展到其他跟随服务机器人视觉跟踪任务中。     

回流燃烧室流动特性试验

为了揭示有/无燃烧状态下燃烧室热态和冷态流场的特征和流动特性，针对某型回流燃烧室单头部试验件，使用粒子图像测速仪（PIV），测量燃烧室燃烧状态下不同截面处的热态流场，以及没有燃烧状态下不同截面处的冷态流场，探讨不同总压损失系数对回流燃烧室热态/冷态流场特征及流动特性的影响。研究表明:随着总压损失系数的增大，冷态条件下各截面流场结构基本保持不变，如射流孔穿透深度、射流角度、回流区位置及大小、流线等基本保持一致，但是各位置点速度大小逐渐增大。热态条件下各截面流场随着总压损失系数增大，流场结构也基本保持不变；相同总压损失系数时，热态流场与冷态流场存在差异，燃油喷射与气流的相对运动将会对燃烧室头部的流场结构造成影响，速度较冷态流动时略微增大。      

Zn含量对Mg-10Gd-4.8Y-0.6Zr合金组织和力学性能的影响

采用显微硬度和力学性能测试及金相显微镜、扫描电镜、透射电镜、X射线衍射等分析手段,研究了Zn含量对Mg-10Gd-4.8Y-0.6Zr合金挤压以及时效处理后合金组织和力学性能的影响。结果表明,在Mg-10Gd-4.8Y-0.6Zr合金中添加Zn元素,有利于细化合金晶粒,提高挤压态的强度。未添加Zn的合金T5态晶粒尺寸约为25μm,添加1%(质量分数,下同)Zn后,晶粒尺寸约为15μm,Zn含量为3%时,晶粒尺寸约为10μm。当Zn含量为1%时,合金挤压态和时效态的抗拉强度分别为337MPa,397MPa,屈服强度分别为128MPa,148MPa,伸长率分别为10.0%,5.0%,具有较好的综合性能。     

甲烷-空气贫燃料预混燃烧的数值模拟

针对燃气轮机燃烧室火焰筒中的甲烷-空气贫燃料预混燃烧问题,给出了基于八步化学反应动力学机理的数学模型。以某型航空发动机燃烧室火焰筒为例,对甲烷-空气贫燃料的预混燃烧进行数值模拟。研究结果表明,基于八步化学反应动力学机理的数值模拟方法,可以比较准确地反映燃烧产物的形成过程,在分析航空发动机燃烧室火焰筒内的贫燃料预混燃烧问题时具有较强的实用性。     

基于单目视觉的三点测量滚转角方法

确定轴对称物体的滚转角是光学测量的重要内容,具有十分广泛的工程应用背景。本文提出一种单像机测量滚转角的新方法,通过3个控制点即可完全确定物体滚转角。仿真数据计算证明了该方法的正确性和可行性。     

改进联邦滤波器在小卫星姿态确定中的应用

采用微小卫星姿态运动学、动力学方程,以磁强计／太阳敏感器为姿态敏感器进行姿态确定,研究了一种基于融合反馈的改进联邦滤波算法,提出了一种基于观测新息修改的信息分配原则。给出了由四元数描述卫星姿态的误差状态方程,并对观测矢量进行推导,获得了基于角速度的观测方程,丰富了观测模型。仿真结果表明：基于角速度观测方程的引入,增强了观测信息的利用率,进而提高了姿态确定的精度,降低了计算量,保证了可靠性。     

论文化图式视角下文化空缺的可译性

文化空缺现象是一种语言文化异质性的极致表现。如何弥补翻译中的文化空缺实现文本连贯重构无疑给译者带来巨大的挑战。从文化图式理论的角度分析文化空缺的可译性及其翻译手段,如意译要做到对源文本的深度忠实等,希望为解决由文化空缺所带来的翻译问题提供新的视野。     

产业生态系统视角下的移动商务经营模式研究

随着移动商务产业的不断发展,移动商务产业价值链逐渐从简单线性价值链向生态化的方向演化.通过对移动商务生态系统的研究,构建了四个以客户为核心、中心企业主导的移动商务产业价值联盟,并形成了与之相匹配的四种经营模式策略.